$2,599.99
The Victron MultiPlus-II is a powerhouse inverter/charger built for versatile energy solutions, offering everything the original MultiPlus does, with added ESS (Energy Storage System) functionality. Available in models 12/3000/120-32 and 24/3000/70-32, it’s ideal for marine, off-grid, and vehicle applications. With PowerControl and PowerAssist, it manages grid or generator power efficiently, preventing overload and boosting peak capacity using battery power when needed.
Designed for resilience, it provides uninterrupted power during outages and features dual AC outputs to manage critical and secondary loads. Compatible with solar systems, the MultiPlus-II works seamlessly with PV and grid-tie inverters for solar integration. Its scalable design allows parallel and three-phase operation, supporting up to 75kW output with configurations.
With the VEConfigure software and GX devices (sold seperately), settings and remote monitoring are a breeze, keeping you in control from anywhere via Victron's VRM portal.
Designed for resilience, it provides uninterrupted power during outages and features dual AC outputs to manage critical and secondary loads. Compatible with solar systems, the MultiPlus-II works seamlessly with PV and grid-tie inverters for solar integration. Its scalable design allows parallel and three-phase operation, supporting up to 75kW output with configurations.
With the VEConfigure software and GX devices (sold seperately), settings and remote monitoring are a breeze, keeping you in control from anywhere via Victron's VRM portal.
- PowerControl - The MultiPlus-II prevents grid or generator overload by prioritizing other AC loads and using only excess power for battery charging
- PowerAssist - PowerAssist enhances PowerControl by using battery power to cover peak demands, then recharging the battery when the load decreases
- Solar energy - The MultiPlus-II ensures AC power remains available during grid failures and works seamlessly with both off-grid and grid-connected solar systems
- Dual AC output - The MultiPlus-II’s main output ensures uninterrupted power to critical devices during grid or generator outages, switching seamlessly in under 20 milliseconds, while a second output powers non-essential loads only when AC input is available
- Virtually unlimited power thanks to parallel and three phase operation - Up to six MultiPlus-II units can be connected in parallel for increased power, or configured in three-phase setups, enabling up to 75 kW output and over 1200 Amps charging capacity in large systems
- On-site system configuring, monitoring & control - Quickly adjust settings using VEConfigure software, and monitor performance with options like Cerbo GX, Color Control GX, Venus GX, and Bluetooth (with VE.Bus Smart dongle) (all sold seperately)
- Remote configuring and monitoring - Connect a Cerbo GX or similar device (sold seperately) to access the internet, allowing free remote monitoring and control of operational data through the Victron VRM website
Specifications:
- Transfer switch: 32A
- Maximum AC input current: 32A
Inverter
- DC input voltage range: 9.5V - 17V
- Output voltage: 230 VAC ± 2%
- Output frequency: Frequency: 50 Hz ± 0.1%
- Continuous output power at 25°C: 3000VA / 2400W
- Continuous output power at 40°C: 2200W
- Continuous output power at 65°C: 1700W
- Peak power: 5500W
- Maximum efficiency: 93%
- Zero load power: 13W
- Zero load power in AES mode: 9W
- Zero load power in Search mode: 3W
Charger
- AC input: 187-265VAC
- AC input frequency: 45-65Hz
- Charge voltage 'Absorption': 14.4V
- Charge voltage 'Float': 13.8V
- Storage mode: 13.2V
- Maximum battery charge current: 120A
- Battery temperature sensor
General
- Auxillary output: 32A
- External AC current sensor (optional extra): 50A or 100A
- Output short circuit, overload, battery voltage too high/low, temperature too high, 230 VAC on inverter output, input voltage ripple too high protections
- Remote on/off
- Operating temperature: -40 to +65 °C (fan assisted cooling)
- IP22 rating for water & dust ingress
- Battery connection: M8 bolts
- 230VAC connection: Screw terminals 13 mm² (6 AWG)
- Weight: 19kg
- Dimensions: 546(h) x 275(w) 147(d) mm
- Supplier part number: PMP122305010
| Brand | Victron |
|---|
Delivery estimate 1-4 business days
$5.99 standard freight rate for non-rural, shoe box sized deliveries. Additional charges apply for rural delivery, island delivery, dangerous goods and large packages.
Returns
Check out our easy returns policy.
