$2,099.99
The MultiPlus by Victron Energy is a compact, multifunctional power solution, combining a true sine wave inverter, adaptive battery charger, and high-speed AC transfer switch.
Designed for flexibility, up to six units can run in parallel or be configured for three-phase output. The PowerControl and PowerAssist features manage limited shore or generator power, using batteries to boost output during peak demand. It includes a four-stage adaptive charger for dual bank batteries, efficient start-up power for high loads, and a programmable relay for alarms.
Remote monitoring and system adjustments are also possible with Victron’s Cerbo GX or GX products (sold seperately)
Designed for flexibility, up to six units can run in parallel or be configured for three-phase output. The PowerControl and PowerAssist features manage limited shore or generator power, using batteries to boost output during peak demand. It includes a four-stage adaptive charger for dual bank batteries, efficient start-up power for high loads, and a programmable relay for alarms.
Remote monitoring and system adjustments are also possible with Victron’s Cerbo GX or GX products (sold seperately)
- Powerful true sine wave inverter, battery charger and high-speed AC transfer switch all in one unit
- Can operate up to 6 units in parallel to achieve higher power output
- PowerControl - With the Multi Control Panel a maximum generator or shore current can be set. The MultiPlus will then take account of other AC loads and use whatever is extra for charging, thus preventing the generator or shore supply from being overloaded
- PowerAssist - PowerAssist enhances PowerControl by allowing the MultiPlus to supplement limited shore or generator power with battery power during peaks, then recharge the battery when demand drops
- Four stage adaptive charger and dual battery bank charging
- Programmable relay - The programmable relay is set by default to de-energize during alarms, such as high temperature, input ripple, or low battery voltage
- Remote on / off
- On-site system configuring, monitoring and control - The MultiPlus main output provides a powerful, adaptive charge that fine-tunes its three-stage process to suit battery conditions, with an added fourth stage for extended float charging. It also includes a trickle charge output for maintaining a second battery, such as a starter battery for the main engine or generator.
- Remote configuring and monitoring - Install a Cerbo GX or other GX device (sold seperately) to connect online, allowing free storage and display of operational data on the VRM website, with remote access for system monitoring and adjustments
Specifications:
- Transfer Switch: 50A
- Parallel & 3-phase operation
Inverter
- Input voltage range: 9.5V - 17V
- Output voltage: 230 VAC ± 2%
- Output frequency: 50 Hz ± 0.1%
- Continuous output power at 25 °C: 2000VA / 1600W
- Continuous output power at 40 °C: 1400W
- Continuous output power at 65 °C: 1000W
- Peak power: 4000W
- Maximum efficiency: 93%
- Zero-load power: 9W
- Zeroload power in AES mode: 7W
- Zero-load power in search mode: 3W
Charger:
- AC input voltage: 187-265VAC
- Input frequency: 45-65Hz
- Charge voltage 'Absorption': 14.4V
- Charge voltage 'Float': 13.8V
- Storage mode: 13.2V
- Charge current house battery: 80A
- Charge current starter battery: 4A
- Output short circuit, overload, battery voltage too high/low, temperature, 230 VAC on inverter output, input voltage ripple too high protections
- Operating temperature range: -40 to +65 °C (fan assisted cooling)
- IP20 rating for water and dust ingress
- Battery connection: M8 bolts
- 230V connection: Spring/clamp
- Weight: 12kg
- Dimensions: 520(h) x 255(w) x 125(d) mm
- Supplier part number: CMP122200000
| Brand | Victron |
|---|
Delivery estimate 1-4 business days
$5.99 standard freight rate for non-rural, shoe box sized deliveries. Additional charges apply for rural delivery, island delivery, dangerous goods and large packages.
Returns
Check out our easy returns policy.
