154944525090352

Victron Battery Protect 65A 12/24V

UPC
43824
$69.99
In stock
Stock availability

The Victron Battery Protect safeguards your battery by disconnecting non-essential loads before it reaches full discharge, which could cause damage, or when there’s not enough power left to start the engine.
This device is uni-directional, meaning it handles current flow in only one direction, either current towards a load, or current from a charger, but not both simultaneously. Additionally, current flows exclusively from the Battery terminal to the Load terminal. When used with a load, the battery connects to the Battery terminal, and when paired with a charger, the charger connects to the Battery terminal.
  • Automatically detects system voltage
  • Can be set to engage/disengage at several different voltages
  • Special setting for lithium ion batteries
  • Ultra low current consumption
  • Over voltage protection
  • Ignition proof due to no relays and therefore no sparks

    Specifications:
  • Voltage: 12V / 24V (auto ranging)
  • Maximum continuous load: 65A
  • Peak current (during 30 seconds): 250A
  • Operating voltage range: 6 - 35V
  • Current consumption: On - 1.5mA, Off or low voltage shutdown - 0.6mA
  • Alarm output delay: 12 seconds
  • Maximum load on alarm output: 50mA
  • Load disconnect delay: 90 seconds (immediate if triggered by the VE.Bus BMS)
  • Load reconnect delay: 30 seconds
  • Default thresholds: Disengage - 10.5V or 21V, Engage - 12V or 24V
  • Operating temperature: Full load -40°C to +40°C
  • IP rating: Electronics - IP67 (potted), Connections - IP00
  • Connection: M6
  • Weight: 0.2kg
  • Dimensions: 40(h) x 48(w) x 106(d) mm
  • Supplier part number: BPR000065400