*Terms and conditions apply
Designed for serious jobs, the Resene Durepox High Performance Clear Coat is a 2-pack epoxy urethane coating made to tackle marine and industrial demands. Perfect as a crystal-clear finish over pigmented Durepox Primer / topcoat or directly on bare carbon fibre, fibreglass, veneer ply, wood, and even concrete. Available in 1L or 4L sizes, this clear coat protects while enhancing natural surfaces.
Pro Tip: If you're using it for a gloss finish on concrete floors, steer clear of wet areas for safety. Always test on a small patch first to make sure it's just what you need!
Pro Tip: If you're using it for a gloss finish on concrete floors, steer clear of wet areas for safety. Always test on a small patch first to make sure it's just what you need!
- Protects and enhances
- Extremely hard wearing
- 1 hour touch dry
- Remarkable flexibility and great adhesion
- Fantastic water barrier
- High film build and low in physical weight
- Can be brushed, rolled or sprayed
- Theoretical coverage: 10m²/L @ 40 Microns DFT
- Mixing ratio: 4 parts Durepox High Performance Clear (Volume) : 1 part Durepox Hardener
- Thinning: Up to 20 – 40% 400, 909 Fast or 400 Slow Reducer
- Recoat-ability: Can be recoated with itself within a 2hr period at 20°C. Outside 2 hour detail sand and recoat.
- Dry Time @ 20°C:
- Touch Dry: 1 Hour
- Handle: 12 Hours
- Self recoat @ 20°C: between 0 and 2 hours. After 2 hours must be detail sanded to ensure intercoat adhesion. Like most 2 pack products the higher the temperature the shorter the pot life. - Durepox High Performance Clear can be applied over pigmented Durepox Primer or directly over correctly prepared: G.R.P. (Fibreglass), Carbon fibre, Pigmented Durepox, Veneer coated ply wood & most wood finishes, concrete
- Volume: 1L or 4L
- Supplier part number: DHPC04