*Terms and conditions apply
Lowrance Elite FS 9'' Fish Finder / Chartplotter
UPC
40264
Will the transducer (thru hull) for my 7inch Lowrance elite height be compatible to your 9 inch model
Question by: Alan on 15/10/2021, 2:28 pm
Lowrance tech support advise that the new FS Elite 9" has a 9 pin transducer cable. If your old transducer is a Lowrance 9 pin cable it will connect. If it is an older transducer with a 7 pin (blue) cable you will need a 7 to 9 adaptor (Lowrance part no 000-13313-001)
Answer by: Website Customer Service (AL) on 18/10/2021, 1:27 pm
Answer The Question
What is the depth range of the ready to go with the CHIRP Active Imaging transducer provided.
Question by: Glen Matthews on 15/11/2021, 2:49 pm
Please be aware that max depth ranges can vary greatly depending on bottom type, water type and water conditions. Lowrance advise that in standard 2D sonar mode in ideal conditions the max depths would be up to 250M salt and 300M fresh.
Answer by: Website Customer Service (AL) on 16/11/2021, 9:11 am
Answer The Question
What is the length of the active imaging 3 in 1 transducer cable
I would need 7m what extension cable would be needed (number of pins) and what would that cost
I would need 7m what extension cable would be needed (number of pins) and what would that cost
Question by: Greville Wood on 10/05/2022, 6:57 pm
Active imaging 3 in 1 transducer cable Length is 7.6m (25ft) with a 9 pin connector, thanks.
Answer by: Website Customer Service (JW) on 11/05/2022, 9:05 am