A general purpose, high strength, ablative antifoul that ensures minimal growth in most marine conditions. Micron One antifouling is designed to offer economical, long-term protection for low speed, displacement type boats; it is quick drying and offers excellent protection for heavy fouling areas. This antifouling can be used on fibreglass, wooden and primed underwater metals. It is not suitable for use on aluminium hulls, outboard motors, sail drives or stern legs.
- Single pack
- Suitable for: fibreglass, wooden and primed underwater metals (except aluminium)
- Coverage: estimated practical 5.4m2 per litre brush, 3.2 m2 per litre spray
- Recommend number of coats: 2 coats per season, 3 coats on leading and trail edges, waterline, rudder and keels
- Minimum time until recoat: 10 Hrs @ 15°C
- Minimum time until launch: 12 Hrs @ 15°C
- Recommend thinner: International Antifouling Thinners #3 (no more than 10% by volume)
- SDS: http://datasheets1.international-coatings.com/msds/YBA752_NZL_eng.pdf (copy and paste)
| Brand | International |
|---|
Delivery estimate 1-4 business days
$5.99 standard freight rate for non-rural, shoe box sized deliveries. Additional charges apply for rural delivery, island delivery, dangerous goods and large packages.
Returns
Check out our easy returns policy.
Product Questions
I have used caboline paint for anti foul. Can I use micron one on top of caboline or will I have to put a primer on first?
Question by: tom mansell on 16/06/2021, 4:52 pm
If the existing paint is in sound condition you will do the usual preparation and apply the Micron One over the Caboline.
If the paint is flaky it will have to be removed and the surface primed before applying the antifoul.
If the paint is flaky it will have to be removed and the surface primed before applying the antifoul.
Answer by: Website Customer Service (JW) on 17/06/2021, 9:35 am
