This chain is specifically designed for anchoring applications to greatly reduce your chance of dragging along to ocean floor. The minimum length of chain we recommend is 1.5 x the length of your boat. Obviously the more you have the less chance you will drag when the wind gets up.
- Top quality galvanised chain
- Short link, GRADE 30, DIN766 grade
- Tested and approved to a high specification
- Sizes 6, 7, 8 and 10mm available
- Sold per metre, but 6mm comes in 60m bucket, 7mm/220m drum, 8mm/175m drum, 10mm/110m drum
- Weight per metre: 6mm/0.80kg, 7mm/ 1.12kg, 8mm/1.42kg, 10mm/2.20kg
- Safe Working Load: 6mm/400kg, 7mm/ 630kg, 8mm/800kg, 10mm/1250kg
- Proof Tested Load: 6mm/1020kg, 7mm/1630kg, 8mm/2040kg, 10mm/3260kg
- Minimum Breaking Load: 6mm/1630kg, 7mm/ 25550kg, 8mm/3260kg, 10mm/5100kg
- All our anchor chain is specifically calibrated for windlasses and is proof tested. All chain exceeds industry specifications and is manufactured in a quality assured ISO 9001:2015 environment.
Delivery estimate 1-4 business days
$5.99 standard freight rate for non-rural, shoe box sized deliveries. Additional charges apply for rural delivery, island delivery, dangerous goods and large packages.
Returns
Check out our easy returns policy.
Product Questions
Hi, will the 6mm chain function correctly with the Maxwell HRC6-FF windlass? Seems you don’t sell the 6mm version, only the 7mm which I’m guessing again is for US 1/4” chain likely called 7mm here?
Question by: Ryan Daniel on 22/11/2023, 7:32 pm
Yes -
Use short link chain: 6mm (HRC6), 7mm (HRC7), 8mm (HRC8)
•Use nylon rope (3 strand or multi-plait): 12mm (HRC6 and 7), 14mm (HRC8)
Use short link chain: 6mm (HRC6), 7mm (HRC7), 8mm (HRC8)
•Use nylon rope (3 strand or multi-plait): 12mm (HRC6 and 7), 14mm (HRC8)
Answer by: Website Customer Service (WE) (Admin) on 23/11/2023, 8:16 am
Answer The Question
How long should my 6mm galvanized anchor chain last before rust starts showing ? I have a 30' keel boat and the anchor gets used regularly while cruising in Feb and March, and sits in the anchor well the rest of the time,
Question by: Gun Caundle on 13/11/2021, 8:32 am
Galv chain wear can vary greatly depending on usage and conditions. Generally a manufacturing fault will crop up very soon after initial use. Otherwise use of a winch gypsy and/or rocky mooring grounds can increase chain wear. If the chain is less than 2 years old please send us pictures to website@burnsco.co.nz and we will investigate further.
Answer by: Website Customer Service (AL) on 15/11/2021, 4:50 pm
Answer The Question
Where is your chain made?
Question by: Julian on 23/11/2021, 9:48 pm
This is good quality chain made to Burnsco specs in China/Taiwan
Answer by: Website Customer Service (AL) on 24/11/2021, 8:54 am
Answer The Question
Grade 30 or grade 40? What working/breaking load per size?
Question by: Joachim GIMENEZ on 15/10/2021, 12:01 pm
Hi Joachim
Burnsco galvanised short link chain (m24431) - 6,7,8 & 10mm are all Grade 40 or DIN 766 grade high tensile chain
Regards
Burnsco Webstore
Burnsco galvanised short link chain (m24431) - 6,7,8 & 10mm are all Grade 40 or DIN 766 grade high tensile chain
Regards
Burnsco Webstore
Answer by: Website Customer Service (GC) on 5/11/2021, 2:47 pm
