Great value fishfinder/chartplotter that is loaded with features to make your fishing trips more fun and successful. Out of the box is ready to go with the CHIRP Active Imaging transducer that will give you SideScan and DownScan.
Has the ability to connect to Lowrance's Active Target Live sonar for ultimate live imaging and seeing fish in real time in front and below the boat. Connects to radar, capable of running 1KW single channel chirp transducers for those wanting to go deeper and can be networked with other units like Elite Ti2 and HDS Live.
FishReveal to clearly see the fish
Capable of running 1KW single channel CHIRP like Airmar TM185 (not included)
Ability to connect to Active target system for live real time sonar (not included)
Radar compatible so you can use the latest Lowrance Halo 24 domes
Full connectivity and touch control of Lowrance Ghost trolling motors
Full networking capability with other Elite FS or HDS Live models through the Ethernet port (no wireless connectivity between units). This gives users capability of sharing sonar, charting, waypoints and other user data between displays
NMEA 2000 connectivity
MicroSD card slot for upgrading to CMAP Reveal chart or for putting in blank card to install software updates or doing data transfer
Bluetooth / WiFi options for software updates while hotspotting to your phone
Power consumption at max - 28W (2A at 13.8V) 3A fuse recommended
$5.99 standard freight rate for non-rural, shoe box sized deliveries. Additional charges apply for rural delivery, island delivery, dangerous goods and large packages.
What is the depth range of the ready to go with the CHIRP Active Imaging transducer provided.
Question by: Glen Matthews on 15/11/2021, 2:49 pm
0
Please be aware that max depth ranges can vary greatly depending on bottom type, water type and water conditions. Lowrance advise that in standard 2D sonar mode in ideal conditions the max depths would be up to 250M salt and 300M fresh.
Answer by: Website Customer Service (AL) on 16/11/2021, 9:11 am
0
Answer The Question
Will the transducer (thru hull) for my 7inch Lowrance elite height be compatible to your 9 inch model
Question by: Alan on 15/10/2021, 2:28 pm
0
Lowrance tech support advise that the new FS Elite 9" has a 9 pin transducer cable. If your old transducer is a Lowrance 9 pin cable it will connect. If it is an older transducer with a 7 pin (blue) cable you will need a 7 to 9 adaptor (Lowrance part no 000-13313-001)
Answer by: Website Customer Service (AL) on 18/10/2021, 1:27 pm
0
Answer The Question
What is the length of the active imaging 3 in 1 transducer cable
I would need 7m what extension cable would be needed (number of pins) and what would that cost
Question by: Greville Wood on 10/05/2022, 6:57 pm
0
Active imaging 3 in 1 transducer cable Length is 7.6m (25ft) with a 9 pin connector, thanks.
Answer by: Website Customer Service (JW) on 11/05/2022, 9:05 am