- Designed to fit onto 28mm waste water fittings
- Detachable cap gives access to remove
- Polypropylene
- Ridged pipe or flexible convolute can be connected to the waste trap
- 97mm wide
Delivery estimate 1-4 business days
$5.99 standard freight rate for non-rural, shoe box sized deliveries. Additional charges apply for rural delivery, island delivery, dangerous goods and large packages.
Returns
Check out our easy returns policy.
Product Questions
Good morning , can you please tell me how the 41644 reducer fitting attaches to the smell trap ports. Is it hose clamped of something else
Question by: Mark Tuck on 16/10/2024, 8:39 am
Hi there, the reducers push fit into the smell trap, and the other end can have a 25mm hose pushed onto it.
Answer by: Burnsco Webstore (BD) (Admin) on 16/10/2024, 9:01 am
Answer The Question
good morning. Re smell trap 39368. I understand you can get push on hose tails to fit 41644. Can you get other types of push on fittings. I am after, push on fitting to male BSP thread to make it tidier to fit a valve in the system.
Regards Mark
Regards Mark
Question by: Mark Tuck on 31/10/2024, 7:10 am
We only sell the Smell trap - no hose or other fittings for this style. thanks
Answer by: Website Customer Service (WE) (Admin) on 31/10/2024, 8:44 am
Answer The Question
sorry guys, re earlier question. It says ridged pipe or flexible convolute can be connected to the waste trap. What can you tell me about the ridged pipe, do you sell it?
Mark
Mark
Question by: Mark Tuck on 31/10/2024, 7:23 am
We only sell the smell trap - no hose or other fittings that are suitable. thanks
Answer by: Website Customer Service (WE) (Admin) on 31/10/2024, 8:45 am
Answer The Question
Can’t you mount these on angle, vertical , upside down?
Question by: Ashley Smith on 16/05/2022, 8:26 pm
This needs to be mounted as per our image to create a proper trap. Other angles will let smell through or restrict flow (if upside down).
Answer by: Website Customer Service (JGW) on 17/05/2022, 11:21 am
