A high performance two pack polyurethane undercoat best used as an after primer. Use prior to applying two pack polyurethane finish coats. Suitable for use on Polyester, Vinylester, Epoxy, Steel, Aluminium, Ferro Cement and Timber hulls.
- Low sheen finish
- Use above the waterline
- Excellent opacity and film building properties
- Excellent gloss hold out of finish coats
- Easy Sanding
- Do not use over any one pack products
- Thinners: For Spraying use International 910 Thinners (up to 25%) PLU 43924, for Brushing use International 100 Thinners PLU 41373
- Touch dry: 3 hrs @ 23°C
- Sandable: 16 hrs @ 23°C
- Coverage: Conventional Spray: 1-3 coats/7.5m2 per litre, Brush: 1-3 coats/8.5m2 per litre, Roller: 1-3 coats/8.5m2 per litre
- Manufacturers data sheet: http://www.yachtpaint.com/MPYACMDatasheets/YRA600_Undercoat+eng+A4+Y+20110907.pdf (copy and paste)
| Brand | International |
|---|
Delivery estimate 1-4 business days
$5.99 standard freight rate for non-rural, shoe box sized deliveries. Additional charges apply for rural delivery, island delivery, dangerous goods and large packages.
Returns
Check out our easy returns policy.
