







Description
- Instant hot water, achieves 25 degrees increase at 5.5LPM (or higher at lower flow rates)
- Water flow of up to 5.5 litres per minute
- The internal micro-processor prevents the water temperature from going above +45C, protecting family and pets
- Simple operation with two dials to control temperature and flow rate
- Temperature display panel on the front so you can control to your desired temperature
- Steel housing, white enamel finish
- Automatic ignition - no pilot light (starts when tap is turned on, stops when tap is turned off)
- Easy-connect colour coded hoses
- Adjustable three spray pattern handset for all uses
- Automatic gas cut off after flame failure
- 20 minute cut off safety timer
- Accepts fresh water from any source
- Requires minimum 30psi to 55psi maximum pressure to run effectively. Burnsco offers a range of submersible or non submersible pumps for this task
- Requires 2 x D cell quality alkaline batteries for operation (not included)
- Includes 1.5m water inlet hose, 1.2m LPG hose, shower head and 2m hose
- This water heater must be installed outside in a well ventilated area. Users are to install strictly in accordance with the supplied manual and the AS/NZ55601 and NZS5428 gas standards.
- ISO9001 Certified
- Dimensions: 370(l) x 290(w) x 150(d) mm
Specifications
Delivery & Returns
Delivery estimate 1-4 business days
$5.99 standard freight rate for non-rural, shoe box sized deliveries. Additional charges apply for rural delivery, island delivery, dangerous goods and large packages.
Returns
Check out our easy returns policy.
Product Questions
Can it heat seawater or only freshwater?
Is there an internal pump (ie can it suck water) or does it require a pressurised input?
What is its weight, approx?
Only fresh water.
No internal pump - requires pressurised water - at least 30PSI - Max 55PSI.
Weight is 7.5Kgs.